Respiratory Protective Equipment (RPE) is a particular type of Personal Protective Equipment (PPE), used to protect the individual wearer against inhalation of hazardous substances in the workplace air.
What is an example of respiratory protection?
Examples are filtering facepieces, half and full-face masks. Loose-fitting facepieces – rely on enough clean air being provided to the wearer to prevent contaminant leaking in (only available as powered respirators or BA). Examples are hoods helmets, visors, blouses and suits.
What serves as respiratory protection?
Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death.
What are the three types of respirators?
The three basic types are: Half Mask/Dust Mask, Half Mask (Elastomeric), and Full Facepiece (Elastomeric). 2. Non-Powered Air-Purifying Respirators: When using a non-powered air-purifying respirator, the user operates it simply by breathing.
What are two main types of respiratory protection?
Two basic types of respirators are: • air-purifying; and • supplied-air respirators.
What constitutes PPE body protection?
Personal protective equipment (PPE) is designed to protect against safety and/or health hazards. Hard hats, safety glasses, and safety boots, for instance, are designed to prevent or reduce the severity of injury if an accident occurs.
When should respiratory protection be used?
Q: When is the use of respirators required? A: OSHA’s respirator standard, 29 CFR 1910.134, requires the use of respirators to protect employees from breathing contaminated and/or oxygen-deficient air when effective engineering controls are not feasible, or while they are being instituted.
What is the OSHA CFR for respiratory protection?
This document discusses the major requirements of OSHA’s Respiratory Protection Standard, 29 CFR 1910.134.
What must be performed every time a respirator is put on?
Each time and every time a respirator is worn, you must check that the respirator is sealing properly to the face. Not all respirators will allow the wearer to temporarily block the inlet openings or valves, but these checks should be done whenever possible. Do not wear a respirator that does not seal properly.
Which hazardous materials do you need to use respiratory protection?
How should respiratory hazards be controlled? Respiratory hazards can include airborne contaminants such as biological contaminants, dusts, mists, fumes, and gases, or oxygen-deficient atmospheres. Note that more than one respiratory hazard can be present at the same time.
Which respiratory protection responsibilities are the employers?
Employers (both host and staffing agency) that allow voluntary use of respirators must ensure the employee is medically able to use the respirator and that the respirator does not present a health hazard, and provide the employee a copy of Appendix D from the Respiratory Protection standard.