Why the Switchport port security command is used for?

The switchport security feature (Port Security) is an important piece of the network switch security puzzle; it provides the ability to limit what addresses will be allowed to send traffic on individual switchports within the switched network.

What is the purpose of configuring port security in Cisco switches?

Port security enables you to restrict the number of MAC addresses (termed secure MAC addresses) on a port, allowing you to prevent access by unauthorized MAC addresses. It also allows you to configure a maximum number of secure MAC addresses on a given port (and optionally for a VLAN for trunk ports).

How do I enable port security on a Cisco switch?

Configuration Steps:

1) Your switch interface must be L2 as “port security” is configure on an access interface. You can make your L3 switch port to an access interface by using the “switchport” command. 2) Then you need to enable port security by using the “switchport port-security” command.

IT IS INTERESTING:  What securities does the Fed own?

What are the three types of port security?

On Cisco equipment there are three different main violation types: shutdown, protect, and restrict.

What is port security aging?

The inactivity aging feature prevents the unauthorized use of a secure MAC address when the authorized user is offline. The feature also removes outdated secure MAC addresses so that new secure MAC addresses can be learned or configured.

How do you show port security?

Use show port-security interface to see the port security details per interface. You can see the violation mode is shutdown and that the last violation was caused by MAC address 0090.

Who is responsible for port security?

The Coast Guard and CBP are the two federal agencies with the strongest presence at seaports. Coast Guard. The Coast Guard is the nation’s principal maritime law enforcement authority and the lead federal agency for the maritime component of homeland security, including port security.

What is port safety?

It includes the protection of the seaports themselves and the protection and inspection of the cargo moving through the ports. Security risks related to ports often focus on either the physical security of the port, or security risks within the maritime supply chain.

Why should you implement port security on a switch interface?

The main reason to use port security in a switch is to stop or prevent unauthorized users to access the LAN. … To stop unauthorized telnet or SSH access to a management interface the switch must be secured with passwords at the command line, with the VTY console command.

IT IS INTERESTING:  Which is a human safeguard against security threats?

What is the primary feature of port security on a switch?

The switchport security feature (Port Security) is an important piece of the network switch security puzzle; it provides the ability to limit what addresses will be allowed to send traffic on individual switchports within the switched network.

Which device would you use to configure port security?

What can you do? Configure port security on the switch. You’ve just enabled port security on an interface of a Catalyst 2950 switch. You want to generate an SNMP trap whenever a violation occurs.

How do I enable port security on an interface?

You can configure all secure MAC addresses by using the switchport port-security mac-address mac_address interface configuration command. You can allow the port to dynamically configure secure MAC addresses with the MAC addresses of connected devices.

What causes port to go err disabled?

Causes of Errdisable

A port duplex misconfiguration is a common cause of the errors because of failures to negotiate the speed and duplex properly between two directly connected devices (for example, a NIC that connects to a switch). Only half-duplex connections should ever have collisions in a LAN.

How do I enable a switch port?

Select Group Port Config. In the graphic for each switch that you want to configure, select the ports that you want to configure. Selected ports display green. Click the Enable Port button to enable or disable the selected ports.