Provide covers and/or guardrails to protect workers from the hazards of open pits, tanks, vats, ditches, and the like. An opening measuring 12 inches or more in its least dimension in a floor, platform, pavement, or yard, through which persons may fall. Standard railing. Consists of top rail, mid rail, and posts.
What protective device is required for a floor opening that measures at least 12 inches and its least dimension?
Which type of floor opening is described below: Floor opening measuring 12 inches or more in its least dimension, located in a floor, platform, pavement, or yard. To be properly guarded, a floor opening should have both a standard railing and a standard toeboard.
What protective device is required for a floor opening that measures 12 inches?
A floor hole is an opening in the floor, platform, pavement, or yard measuring less than 12 inches but more than 1 inch in its least dimension, through which materials could fall. ◦ Every floor hole that is a potential hazard must be protected by either a standard railing with toeboard or a cover.
Which property describes a floor opening?
What properly describes a floor opening? A floor opening is an opening that: Measures at least 30 in. (762 mm) and 18 in.
What is being described in the following definition an opening in the floor platform or pavement that measures 12 inches or more and through which persons may fall a floor hole B floor opening c wall opening D railing?
A floor opening is an opening or entry or hole that is at least 12 inches or more than that in the pavement, yard, platform, floor or anything in which someone or something can fall in it. It is made for the entry or exit of person to fix anything under or above this pavement or platform.
At what diameter must floor holes be covered?
Every floor hole into which persons cannot accidentally walk (on account of fixed machinery, equipment, or walls) shall be protected by a cover that leaves no openings more than one (1) inch wide. The cover shall be securely held in place to prevent tools or materials from falling through.
What are the top 3 OSHA cited ladder violations?
Top 10 Most Frequently Cited OSHA Violations in 2019
|Type||Number of Violations|
|1. Fall Protection (General)||6,010|
|2. Hazard Communication||3,671|
|4. Control of Hazardous Energy (Lockout/Tagout)||2,606|
What is the difference between a hole and an opening OSHA?
So according to OSHA, not only is the location of a hole different than an opening (walking surface vs. wall), but so is the physical size of the void into which – or through – a worker may fall.
What is a floor opening OSHA?
Floor opening: an opening measuring 12 inches or more in its least dimension, in any floor, platform, pavement, or yard through which persons may fall; such as a hatchway, stair or ladder opening, pit or large manhole.
What are approved fall protection measures?
Generally, fall protection can be provided through the use of guardrail systems, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
What opening does not require guardrails?
Section 1926.451(b)(3) does not require fall protection or guardrails when: (1) the front edge of the platform is 14 inches (36 cm) or less from the face of the work; (2) when outrigger scaffolds are 3 inches (8 cm) or less from the front edge;1 and (3) when employees are plastering and lathing 18 inches (46 cm) or …
Do guardrails have three main parts?
Guardrails have three main parts: a top rail, a mid rail, and a toe board.
What is being described in the following definition an opening in the floor?
What is being described in the following definition: An opening in the floor, platform, or pavement that measures 12 inches or more, and through which persons may fall.